M12 Threaded S Type Load Cell 200lb 400lb 600lb Tension Compression Force Sensor
M8 threaded universal S Beam Load Cell FS6A/FS6B is strain gauge based intended for tension and compression force measurement. S Type Load Cell FS6A/FS6B offers 0-11lb / 0-22lb / 0-44lb / 0-66lb / 0-110lb / 0-220lb / 0-440lb / 0-660lb eight rated measuring ranges to choose from. M8/M12 metric threaded holes located on both ends can be used to mount attachments such as eye bolts and hooks for adapt to different cases. S type force transducer FS6A/FS6B offers an accurate and affordable measuring solution for applications such as material testing machines, hanging scales, hopper weighing, automation equipment and so on.
Dimensions
Specifications
| Capacity | 5kg / 50N / 11 lb 10kg / 100N / 22 lbf 20kg / 200N / 44 lb 30kg / 300N / 66 lbf 50kg / 500N / 110 lbs 100kg / 1kN / 220 lb 200kg / 2kN / 440 lbf 300kg / 3kN / 660 lb |
| Rated output | 2.0mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.05% of full capacity |
| Hysteresis | ±0.05% of full capacity |
| Nonrepeatability | ±0.03% of full capacity |
| Creep(5min) | ±0.03% of full capacity |
| Safe overload | 150% of full capacity |
| Ultimate overload | 200% of full capacity |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./10oC |
| Temperature shift span | ±0.05% R.O./10oC |
| Input resistance | 385±50 ohms |
| Output resistance | 380±30 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP50 |
| Material of element | Alloy steel |
| Cable | Ø5 *2000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation-
Green--Signal+ White--Signal- |
A Force Sensor is a transducer that converts mechanical load into mV signal proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply, the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of S-beam load cell FS6B is around 2.0mV/V.
Power supply of S type force sensor FS6B is normally within 3-15V.
Load / Capacity is within 0-1.
So the output range of S beam force transducer FS6A is normally within -30mV...+30mV for tension and compression force measurement.
Example one: S type Load Cell FS6B-100kg with 2.0mV/V sensitivity powered by 5V DC,the output range is -10mV...+10mV.
Example two: S beam force sensor FS6B-200kg with 2.0mV/V sensitivity powered by 10V DC,the output range is -20mV...+20mV.
A signal conditioner can be used with the load cell to deliver -5~5V, 0-10V or 4-20mA output.
Example: S type force transducer FS6B-300kg working with -5-5V amplifier,the Force-Voltage relationship will be 0-300kg compression load VS 0-5V output, 0-300kg tension load VS 0-(-5V) output,which is linear regardless of measurement error.
MM12 Threaded S Beam Load Cell 200lb 400lb 600lb Tension Compression Force Transducer
Click here to download datasheet
|
|
M12 Threaded S Type Load Cell 200lb 400lb 600lb Tension Compression Force Sensor Images
|
